Page 25 - O-Plumbing.indd

Sum 1-800-634-6313 423-461-4700 O25
www.summersindustrial.com

PLUMBING

ADJUSTABLE CLEVIS HANGER A
B
PHD #450 C
D
Size Range: 3/4 through 6 inch. E
Material: Carbon steel. F
Approvals: Underwriters' Laboratories listed and Factory Mutual approved for 3/4 through 8 inch G
pipe. Complies with Federal Specification WW-H-171E (Type 1) and Manufacturers Standardization
Society SP-69 (Type 1).
Service: Recommended for the suspension of stationary pipe lines. Maximum temperature: 650
degrees Fahrenheit.
Installation: Hanger load nut above clevis must be tightened securely to assure proper hanger
performance. When an oversized clevis is used, a nipple should be placed over the clevis bolt as a
spacer to assure that the lower U-strap will not move in on the bolt.
Adjustment: Vertical adjustment without removing pipe may be made from 1-1/8 to 5 inches,
varying with the size of clevis. Tighten upper nut after adjustment.
Features:
• Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus
bending of bolt is minimized.
• Sizes 5 inch and up have rod and two nuts instead of bolt and nut; thread length on clevis rod is
such that the thread locks the nuts in place, and threads are not in shear plane.
• The unique new tear drop shape design eases making hanger rod measurements and reduces
assembly time by helping to maintain the hanger in its upright - final installed position.
• This feature is of particular benefit on the larger size clevis hangers.
Finish: Black unless otherwise ordered.

Product Pipe Mfg. # A B Adjustment E Cross Max. Recom Approx H
# Size CD Bolt Load Wt. Each I
lbs J
lbs K
L
373779 1/2 450 3/8 2-7/16 2-7/8 1-1/8 2 1/4 730 .24 M

373780 3/4 450 3/8 2-5/8 3-1/8 1-1/4 2-3/16 1/4 730 .24

373800 1 450 3/8 3-1/16 3-3/4 1-5/8 2-5/8 1/4 730 .28

373820 1-1/4 450 3/8 3-3/8 4-3/16 1-5/8 2-15/16 1/4 730 .32

373840 1-1/2 450 3/8 3-1/2 4-7/16 1-5/8 3-1/16 1/4 730 .40

373860 2 450 3/8 3-3/4 5 1-5/8 3-5/16 1/4 730 .52

373900 3 450 1/2 4-1/4 6 1-1/8 3-5/8 3/8 1350 1.10

373905 4 450 5/8 5-1/2 7-11/16 1-3/4 4-11/16 3/8 1430 1.48

373910 6 450 3/4 6-7/8 10-1/8 1-5/8 6 1/2 1940 2.76

BRACKET BRACKET N
O

P

Product # - 375129 Product # - 375130 Q
R
Mfg. # - 521-810; HOLDRITE size up to 1” CTS Used for stabliz- Mfg. # - 521-851; HOLDRITE size up to 1/2 & 3/4” CTS Used for
ing copper. stablizing copper.

August 31, 2009