Page 23 - O-Plumbing.indd

Sum 1-800-634-6313 423-461-4700 O23
www.summersindustrial.com

PLUMBING

C-CLAMP with LOCKNUT A
B
ANVIL FIG. NO. 86 C
D
MAXIMUM TEMPERATURE: 450 degrees Fahrenheit E
F
MAXIMUM RECOMMENDED LOAD: 400 lbs. G

ROD SIZE RANGE: Manufacturer availability 3/8 through 3/4 inch

MATERIAL: Malleable iron clamp; hardened steel cup point set screw.

FINISH: Black

APPROVALS: Underwriters’ Laboratories listed and Factory Mutual approved. Complies with Federal Speci-

fication WW-H-171E (Type 23) and Manufacturers Standardization Society SP-69 (Type 23).

SERVICE: Recommended for attachment to American Standard I-beams and wide flange beams where

thickness of flange Z does not exceed .75 inches.

INSTALLATION: Caution should be taken not to overtighten the set screw.

FEATURES: • Malleable body assures: (1) uniform quality and strength; (2) full thread engage-

ment.

• Hardened steel cup point set screw for securing to beam flange.

Product # Rod Size Max. Pipe C E H Approx Wt. Carton Qty
A Size 1-3/4” 5/8” 1-3/8” each lbs. 50
373920 1-3/4” 5/8“ 1-3/8” 50
373940 3/8” 2” .28

1/2” 3-1/2” .31

UNIVERSAL C-CLAMP WIDE THROAT H
I
ANVIL FIG. NO. 93

J

K

Size Range: 3/8” & 1/2” L
Material: Malleable iron clamp, hardened steel cup point set screw and locknut. M
Approvals: Underwriters Laboratories. Complies with Federal Specification WW-H-171E and Manufactures Standardization Society N
SP-69(Type 19 & 23). O
Service: Recommended for use under roof installations with bar joint construction, or bottom flange of structural shapes where the
vertical hanger is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 1-1/4” .
Installation: Follow recommended set screw torque values per MSS-SP-69.
Features:
• They may be attached to horizontal flanges of structural members in either the top beam or bottom beam positions.
• Secured in place by cup-pointed set screw tightened against the flange. A jam nut is provided for tightening set screw against the

body casting.
• Thru tapping of the body casting permits extended adjustment of the threaded rod.
• Wider throat attaching to flange with up to 1-1/4” thickness.
Finish: Black

Product # Rod Size Max. Pipe B C D E F G H Approx Carton P
A Size 1-1/4” 1-5/16” 2-5/32” 9/16” 13/16” 3/8” 5/8” Wt. Each Qty Q
373945 1-1/4” 1-3/8” 2-11/32” 1/2” 1-1/16” 7/16” 13/16” R
373950 3/8” 4” lbs. 40

1/2” 8” .41 20

.75

August 31, 2009