Page 9 - O-Plumbing.indd

Sum 1-800-634-6313 423-461-4700 O9
www.summersindustrial.com

PLUMBING

1/3 HORSEPOWER SUBMERSIBLE SUMP PUMPS A
PEDESTAL SUMP PUMPS

Split phase motors; no starting Oil-filled motor for maximum B
switches or relays required. heat dissipation and con- C
Thermal overload protection tinuous bearing lubrication. D
to prevent motor burn-out. Shaded pole motor eliminates E
Top-mounted adjustable float starting switches. Recessed F
switch for easy accessibility. vortex impeller operates com- G
Fits 12" diameter x 24" deep pletely out of volute; provides H
or larger sump pits. Avail- free flow-through passage I
able with corrosion resistant for solids and liquid and has J
thermo-plastic pump housing minimal radial loading for long K
and base. Top-screened inlet bearing life. For many years of L
to reduce clogging. 8' heavy maintenance-free operation. M
duty cord with three-pronged Automatic models available N
grounded plug. with piggy-back float switch - O
mercury free. Heavy cast iron P
motor housing and volute case Q
dissipate heat, allow motor to
run cooler for extended life,
resists corrosion.

Product Capabilities: 31 GPM 117 Imp
23’ 7m
Capacities To
Heads To 7 to 10” 178-254 mm
Pump Down Range 4-1/8” 107 mm

Float Switch 1/2” 12.7 mm
Vertical Switch
Product Capabilities: Solids Handling Capacity Fresh Drain Water, Effluent
Liquids Handling
Capacities To 55 GPM 189.3 LPM Intermittent Liquid Temp. 1400 F 60o C
Motor
Heads To 18’ 5.5 m Electrical 1/3 HP shaded pole, 1550 RPM
Acceptable pH Range
Pump Down Range 9-10” 228-254 mm Discharge, NPT 115V, 7.5 amps 10,60 Hz
Minimum Sump Dia
Solids Handling Capacity 1/8” 3.18 mm Construction Materials 5-9
Motor Housing, Volute Cs.
Liquids Handling Drain Water Pump Case 1-1/2” 38.1 mm
Impeller
Intermittent Liquid Temp. 140o F 60o C Power Cord 12” 305 mm
Mechanical seal
Motor 1/3 HP split-phase, 1625 RPM
Product # - 393080
Electrical 115V, 5.7 amps. 10,60 Hz Cast Iron, Class 30, ASTN A48
Mfg. # - SSM33P-1 High Impact ABS Thermoplastic
Acceptable pH Range 6-9
Recessed, Thermoplastic
Discharge, NPT 1-1/4” 31.8 mm 10 of 20’, 16/3 SJTW/SJTW-A

Minimum Sump Dia. 12” 304.8 mm Carbon and Ceramic

Construction Materials M81 MCSP3I

Volute Thermoplastic Cast Iron

Impeller Themoplastic

Column Thermoplastic Steel

Shaft PVC Steel

Float Thermoplastic

Product # - 393000

Mfg. # - 81-0001; M81

R

August 31, 2009