Page 12 - O-Plumbing.indd

O12 Sum 1-800-634-6313 423-461-4700
www.summersindustrial.com

PLUMBING

“FULL-FLOW UNICHECK” VALVE FLOOR SUCKER UTILITY PUMP

A Model 43

B

Compare These

C Features:
• Pumps down to within 1/8” of
base • UL listed 8’, 3-wire power

cord and plug • Non-Automatic •
D Durable molded pump • Body is
Dupont Rynite • Corrosion resis-

tant • Oil-filled motor • Thermal

E overload protected • 1-1/4” NPT
vertical discharge with a garden
• Flapper bends over a radius, no sharp 90° edges - lengthens life hose adapter • Vent hole to help
of flapper hinge. • ABS plastic check body is bolted together and prevent air lock • Screened bot-
can be solvent welded for rigid piping system. • Full flow design tom may be removed to allow easy
cleaning • Compact design will
F - no restriction. • Checks back flow of water and sewer gas. • fit in a 6” opening • Maximum
temperature for dewatering - 120°
Simple to install, no threading of pipe required. • Neoprene gasket F (50°C) • 115V - 1PH - 6 amps
and flapper, weighted with brass backing plates and stainless steel - 1/4 H.P. • Height - 10” • Weight - 9 lbs. (packed 4 to a master
rivet. • Can be installed on vertical or horizontal line. • Slips carton - ship wt., 36 lbs.) • Use Floor Sucker submerged or on
any flat surface to pump clear water.
G over ABS, PVC, steel pipe or copper piping. • Stops motor and
Total Dynamic Head Flow Per Minute
pump noise from plumbing system. • Unicheck rated at 25 psi Head Capacity Units/Hour
pressure (57-foot of head). • Flexible neoprene slip x slip unions

H include clamps. • Extra wide flapper hinge prevents hinge stress.
• Saves installation time and material cost.
5 900
Product # - 393195 10 810
15 510
Mfg. # - 30-0181 - 1/2” or 1-1/4” slip x slip ABS construction 20 120

I Product # - 393205 Product # - 393030
Mfg. # - 30-0151 - 2” slip x slip cast iron construction, with cor-
Mfg. # - 42-0007
J rosion resistant powder coated epoxy finish
SIMPLEX SEWAGE PACKAGE SYSTEM
SUBMERSIBLE PUMP
K

L • Ease of installation • Shipped Construction style: These motor housings contain non-toxic
M prepackaged and ready for in- mineral oil providing continual lubrication and optimum cooling
N stallation • Lightweight - Com- for maximum motor life. Aluminum housings are best at dis-
O pact - Economical
P Systems Include: sipating heat, thereby cooling the motor.
• 2” solids handling pump • 6’ Power Cord, UL Approved • Operates
2” PVC discharge pipe, 30” submersed, aluminum housing, coated
long • Basin - Polyethylene with protective epoxy. Screened, side inlet
Structural Foam • Unicheck lessens pickup of settled debris. 1/4”
30-0151 (Not Included- Product MNPT outlet. 170 GPH.
# - 393205)
Product # - 489015
Product # - 393200
Mfg. # - 521203 - 1-MA Submersible
Mfg. # - 912-0063 - 2” Vent; Pump
Pump, M266 - 115 Volt; Basin
Size, 18” x 30”; Weight Lbs., 64

Q

R

August 31, 2009