Page 16 - I-IndustrialChemicals.indd
P. 16
I16 Sum 1-800-634-6313 423-461-4700
www.summersindustrial.com
INDUSTRIAL CHEMICALS & LUBRICANTS
A
B WHITE LITHIUM LUBRICANT DRY GRAPHITE LUBE
C • Ideal where a dry lubricant is required or where
• This high solids, non-staining white grease is ex- petroleum products must be avoided • Adheres with
cellent for metal-to-metal applications • It inhibits minimum pre-treatment, and is effective to 850 degrees
D corrosion on unpainted metal surfaces and will not F constant and 1000 degrees F intermittent • Excellent
drip or run on vertical surfaces • USDA H-2 rated conductivity • Dries rapidly at room temperature •
• Effective from -20 degrees F to +300 degrees F • Coefficient of friction .123 • Does not contain Chlo-
rinated solvents
Includes extension tube
E Product # - 443890 Product # - 444516
Mfg. # - S00100 - 16 oz. Can, (11 oz. net wt.), Case Mfg. # - S00204 - 16 oz. can (10 oz. net wt.); case
pack, 12
Pack, 12
F
FOOD GRADE SILICONE LUBE BELT DRESSING
G • Conditions belts while increasing pulling power
up to 50% • Authorized by USDA • Contains no
• A colorless, odorless low-viscosity lubricant • Meets rosin or asphalt • Will not glaze or collect dust •
FDA when no more than 10 ppm is applied • Ideal For leather, rubber, canvas & fabric
H for use in close proximity to foods where petroleum Product # - 430360
products and other organics would contaminate •
5% silicone formula • USDA H-1 rated • Will not Mfg. # - S00607 - 16 oz. can (11 oz. net wt.), case
I attack delicate surfaces such as styrene or urethane pack 12
• Prevents sticking • Equipped with spray-any-
way-valve
Product # - 444501
J Mfg. # - S00210 - 16 oz. cans (10 oz. net wt.); Case
pack, 12
K FOOD GRADE SILICONE MOLD TF CONTACT CLEANER
L RELEASE (3%)
M Ideal for sensitive equipment and precision instru-
N • Low viscosity silicone formulas ideal for hot or cold ments. Cleans parts quickly. Non-conductive and
O molds • Recommended for use on acrylics, cellulosics, non-flammable so equipment can be cleaned while
P ABS resins, polystyrenes, polyesters, wax, rubber, operating. • Will not react with plastics or elasto-
T.F.E. and ceramics • Meets FDA regulation 21 CFR mers • Safe on all metals • Quickly penetrates
178.3570 as a release agent in the manufacture of to remove oil, grease, dirt and other contaminants
food containing materials • Non-staining, non-cor- • Dielectric strength: 18,000 VPM
rosive formula • Effective at mold temperature from
40 deg. F to 550 deg. F Product # - 430366
Uses: Plastic injection molders, compression mold-
ers, candle molders, investment casting, extruders, Mfg. # - S02202 - 16 oz. can (16 oz. net wt.), case
blow molders, foundries and lost wax process. pack 12
Product # - 681014F
Mfg. # - S00303 - 16oz. cans (12oz. net wt.); Case
pack, 12
Q
R
August 31, 2009