Page 15 - I-IndustrialChemicals.indd

Sum 1-800-634-6313 423-461-4700 I15
www.summersindustrial.com

INDUSTRIAL CHEMICALS & LUBRICANTS

A

RED INSULATING VARNISH LUBRICANTS & RUST PREVENTATIVES B
C
Thoroughly penetrates old and new materials, T.F.E. Dry Lube - S00708 D
air dries faster than most insulating aerosols. E
Provides good adhesion, high arc resistance and Dry, non-oily, non-staining lubricant. Made F
non-tracking properties. Air-dries in 10-15 min- with DuPont Krytox. Produces an extremely low G
utes; tack-free in 60 minutes. Use as insulating static coefficient of friction (.02 to .04), making
varnish in Class F systems as well as a finish it ideal where low speeds and light loads are
coat. Resists abrasion and wear. Contains no involved. Dries quickly to a white, chemically
chlorinated solvents. Dielectric strength; up to inert film. Excellent for use in textile industries.
2,100 VPM. Equipped with DanVern Standard Effective from -40 degrees F to +572 degrees F.
Valve. Oil resistant per ASTMD-115-55. For motor Resists most solvents. Uses: Metal extrusions,
windings, transformers, commutator ends, sealing munitions, locks and catches, window guides,
electrical and electronic components, field coils, synthetic fibers, machine parts, cord, twine or
armatures, stator windings, rings and frames, bus rope, leather drawers, hinges, paper, glass, elas-
bars, switchboard parts. Ideal for general coat- tomers and some plastics. Use as release agent
ing, impregnating and insulation of electrical and on conveyor belts, chutes and slides, industrial
electronic products, particularly small field and blenders, tanks, bins and spray booths.
magnet coils, inside walls of control boxes.
Product # - 190138
Product # - 681016
Mfg. # - S00708 - 16 oz.(10 oz.net wt.) Aerosol
Mfg. # - S00601 - 20 oz. Aerosol Can; Packed Can; Packed 12/case
12/case.
H
DRY MOLY LUBE
GRAPHOKOTE I
A high pressure, high solids molybdenum di- J
sulfide coating. 200 Dry Moly Lube withstands No. 220 Plus K
pressure up to 500,000 PSI. Penetrates pores of Aerosol Dispenser L
substrate and bonds to the surface for long-last- M
ing lubrication. New improved, will not clog nozzle. An easily ap- N
• Air dries in 5-10 minutes, cures in 2 hours plied aerosol graphite, dry film lubricant for use
at room temperature • Maintains effectiveness on close tolerance precision parts such as lightly
under high temperatures (650°F. constant and loaded sliding mechanisms or cams. Especially
750° F. intermittent) • Non conductive • Does useful under dusty operating conditions. Non-
not contain methylene chloride. Use for assembly Flammable.
and run-in lubrication, automotive and industrial
gaskets, sliding surfaces and gears, chutes and Product # - 220100
bins, bearings, chain drives, intricate mecha-
nisms, vending machines, parking meters, roller Mfg. # - SL-220 1W, 12 oz. Can( Net Wt., 11 oz.);
chains, conveyor belts where heat is present. Packed 12/case

Product # - 681015 PB BLASTER
PENETRATING CATALYST
Mfg. # - S00200 - 16 oz. Aerosol Can; Packed
12/case.

DRY GRAPHITE LUBE

Ideal where a dry lubricant is required or where Product # - 412580 O
petroleum products must be avoided. Resists dirt, P
dust and oil build-up. Wide effective temperature Mfg. # - 16PB - 12oz. Aerosol Can Q
range up to 850°F constant Case Qty. - 12 R

Product # - 396445

Mfg. # - 03094; 16oz Aerosol Can
Packed 12 per Case
Min. Sale - 1 Case

August 31, 2009