Page 4 - H-PrecisionInstruments.indd

H4 Sum 1-800-634-6313 423-461-4700
www.summersindustrial.com

PRECISION INSTRUMENTS

A UNIVERSAL BACK PLUNGER DIAL ATTACHMENTS FOR STARRETT NOS. 196,
B TEST INDICATORS 196M SERIES UNIVERSAL TEST INDICATORS
C
D No. 196 Series - Snug (Sleeve) Complete - No. PT18724 Post has a 3/8” diameter
E (9.5mm) and 3/32-1/4” (2.4-6.3mm) holding capacity. Can be
F Graduation .001”, Range .200” used with our Nos. 57 and 257C and D Sur-
G Accurate and reliable. Simple to operate. Rug- face Gages and No. 657AA Magnetic Base with
H upright post.
I ged, with few moving parts. Smooth in operation.
J Product # - 355524
K Inexpensive - the best indicator value you can
L Mfg. # - PT18724 (196L) - EDP No. 50710 - Sleeve Complete, 1/4”
M buy. While there is a need for test indicators with and 3/8” Holes
N
O finer graduations, such as our No. 708 Series, this DECIMAL EQUIVALENT CHART

indicator with graduations to .001” and 0.01 mm will Product # - 121400

handle by far the majority of jobs. Shank diameter is Mfg. # - 1214

1/4” (6.3mm). For full use, the operator first chooses the

proper contact from the three hardened contact points

that come with each model.hen the contact should be

brought against the work with enough pressure to give

the hand one full turn. Set the hand at zero by rotating

the dial with the knurled bezel. This provides one full rotation of

the hand both to the right and left of zero, showing a rise or drop

in the work and the amount of that variation.

Attachments for Starrett No. 196 Include:

Contact Points & Adapter Only

Hardened Steel Contact Point:

Catalog/Part No. EDP No.

PT05471 70617

PT05472 70618

PT05473 70619

Clamp - No. PT99437 - EDP No. 64492 - with a 1-5/16” (33m)

flat or round capacity, 5/16” (8mm) post used with No. PT18718

Snug.

Tool Post Holder - No. PT99438 - EDP No. 64493 - 3/8” x 3/4” x

6” (9.5x19x150mm) with upright spindle 5/16” dia. x 4-1/2” lgth.

(8x114mm). Use with No. PT18718 Snug.

Snug (Sleeve) Complete - No. PT18718 - EDP No. 50709 - Post

hole has a 5/16” diameter (8mm) and 3/32-1/4” (2.4-6.3mm) hold-

ing capacity. Can be used on our No. 252 Height Transfer Gage,

Nos. 57 and 257A and B Surface Gages, on No. 657A Magnetic

Base and Swivel Post Assembly.

Hole Attachment - No. 196F - EDP No. 50706 - Lets indicator

be used over obstructions and inside holes to a depth of approxi-

mately 1-5/8” (40mm).

Product # - 355526
Mfg. # - 196A1Z - EDP No. 50697; Grad., .001”; Dial Reading, 0-

100; Range, .200”; Desc., Indicator with 3 Contact Points, Adapter,

3 Attachments* in Case

*Attachments include clamp, tool post holder, snug and hole at-

tachment.

Product # - 355525
Mfg. # - 196B1 - EDP No. 50699; Grad., .001”; Dial Reading, 0-

100; Range, .200”; Desc., Indicator with 3 Contact Points and No.

196R Adapter only.

P

Q

R

August 31, 2009